Free System Design Service

Dock made for iPod with RS-232 & Control4 Driver – P-3036

SKU: P-3036. Category: .

Channel Vision’s P-3036 is an on-wall dock made for the iPod® that allows you to listen, charge and control your iPod music and video from any room in your home or business with IR commands and RS-232 for advanced touchscreen control. With its elegant design and functionality, it enhances your iPod entertainment experience.

Not featured is the expander section that allows the addition of a controller next to the iPod providing a uniform look and feel.

Key Features

  • On-Wall dock made for iPod
  • Compatible with A0505 or Apple® remote
  • RS-232 interface & Control4 Driver
  • Built-in IR reciever
  • Charges the iPod
  • Allows viewing of iPod videos on a TV
  • Mounts in a standard 2 gang box
  • 30 pin connector version

Support Files


Audio Output:

Output level: 0.9 Vrms(may vary with iPod model)
THD + noise: <0.2%, 20Hz-20kHz
Signal/noise: >-96dB
Frequency response: 20hz-20kHz +/- 0.3dB
Output impedance: 600 Ohms

Power Requirements:

15VDC @ 0.500A (500mA)

Power Supply:

15VDC @ 850mA

Wire Type:

4-pair, UTP category 5, 5e or 6

Recommended Max. Cable Length:


Video Output:

1 Vp-p(may vary with iPod model)

Video Type:


RS-232 Protocol Standard:

8-bit data, no parity, 1 stop bit

Baud Rate:


Serial Cable Specifications:

Straight through, pins 2, 3, & 5


Wall Dock (2-gang): 4.88”W x 5.14”H x1.24”D (front)
Rear Depth: 1.56”
Wall Dock and Keypad(3-gang): 6.73”W x 5.14”H x 1.24”D (front)
Rear Depth: 1.56”
Output: Plate (1-gang): 3.15”W x 5.14”H x 1.24”D (front)
Rear Depth:1.95”



Operating Temperatiure:

-10ºC to +50ºC

Frequently Asked Questions

Ask A Question

Submit any product questions you might have and a Channel Vision representative will address them immediately.


There are no reviews yet, would you like to submit yours?

Be the first to review “Dock made for iPod with RS-232 & Control4 Driver - P-3036”